Brochure
MACH MDV 855
Vertical machining centre
oppure chiama +44 (0) 117 965 2706oppure chiama +1 313 489 9667
Descrizione
The MACH MDV 855 is a heavy-duty, production-led vertical machining centre: tough, uncompromising and always ready to put in a shift.
It has the PC-based, fully closed-loop DynaPath WinDelta control, a belt-driven BT 40 spindle, a 24-position swing-arm tool changer and linear roller guideways.
The DynaPath control has a 15.6" touchscreen, accepts programs by USB, Ethernet or wireless, and can be programmed conversationally, from DXF or in ISO/EIA G-code.
Punti di forza
- UKCA/CE safety enclosure
- Solid-state hard drives
- Yaskawa digital drives, interlocks and electrical equipment
- Bed wash
- 24-tool swing-arm ATC
- C3-class PMI precision ball screws
- Automatic lubrication
- LED machine lighting
Accessori
Disponibili per questa macchina. Chiedeteci quando inviate la richiesta.
- 4º asseTavola rotante DynaPath integrata nel controllo, installata e allineata da MACH.Scopri di più su 4º asse
- TastaturaMisuratore utensili e tastatore mandrino, montati e calibrati da MACH.Scopri di più su Tastatura
- Lettura digitale e righeVisualizzatori digitali e righe per gli assi e la pinza.Scopri di più su Lettura digitale e righe
- Postazione di programmazioneUn PC di programmazione DynaPath offline che si collega alla macchina via Wi-Fi.
Specifiche tecniche
- Spindle taper
- BT40 / CAT40
- Spindle
- 8,000rpm belt drive · rated output S1 7.5kW (10hp), S6-40% 11kW (15hp) · torque 61Nm (S6-40% 85Nm) · air cooled
- XYZ travel
- 800 x 550 x 500mm
- Axes type X/Y/Z
- Linear Rollers
- Spindle nose to table
- 120 - 670mm
- Tool centre to column
- 590mm
- Motors X/Y/Z
- 28.7Nm/ 28.7Nm / 54Nm Direct Drive
- Max thrust
- 10707N
- Spindle diameter
- 150mm
- Tool changer
- 24 Tool Arm Type
- Max tool dia / weight
- Ø80mm / 8 kg
- Max rapid speed X/Y/Z
- 36 m/min
- Max cutting feed X/Y/Z
- 20 m/min
- Positioning accuracy
- 0.006mm
- Repeat accuracy
- 0.003mm
- Table size
- 1000 x 500mm
- Table slots × offset × width
- 5 x 90mm x 18mm
- Max table load
- 500 kg
- Floor space W × L × H
- 2860 x 2400 x 2370mm
- Machine weight
- 5800 kg
- Coolant capacity
- 250 L
- Air requirements
- 6 kg/cm2 (90 psi)
- Power requirements
- 21 kVA, 3 Phase, 220V
Download
Brochure
MDV vertical machining centres (full brochure)
Scarica la brochure MDV vertical machining centres (full brochure) (si apre in una nuova scheda)Dimensioni della macchina
MDV 855 machine dimensions
Scarica MDV 855 machine dimensions (si apre in una nuova scheda)Dimensioni della macchina
MDV 855 machine specifications
Scarica MDV 855 machine specifications (si apre in una nuova scheda)Video
MACH MDV 855 launch: cutting EN3 steel with MA Ford tools
Manuale
DynaPath WinDelta mill control: control, operating and programming manual
Scarica DynaPath WinDelta mill control: control, operating and programming manual (si apre in una nuova scheda)Video
DynaPath mill conversational: hole import demo
Video
DynaPath mill DRO and semi-auto mode: a quick introduction
Video
Editor conversazionale MACH DynaPath
Video
How to calibrate a Blum spindle probe
Video
DynaPath conversational editor: the 'Corner' event
Video
A quick look at the DynaPath WinDelta CNC control
- Guide rapide DynaPath (21)Guide d'uso e di programmazione conversazionale per il controllo di questa macchina
Altre macchine di questa gamma
MACH MDS 845-24T-S
Series
- X / Y / Z travel: 800 / 450 / 450mm
- Table size: 850 × 420mm
- Spindle: BT40, 12,000 RPM direct drive, 7.5Kw (10HP)
MACH MDV 855-S
Series
- X / Y / Z travel: 800 x 550 x 500mm
- Table size: 1000 x 500mm
- Spindle: BT40 / CAT40, 12,000 RPM direct drive, 11 kW (15 HP)
MACH MDV 1160
Series
- X / Y / Z travel: 1100 x 600 x 600mm
- Table size: 1200 x 600mm
- Spindle: BT40 / CAT40, 8000 RPM belt drive, 11 kW (15 HP)
MACH MDV 1160-S
Series
- X / Y / Z travel: 1100 x 600 x 600mm
- Table size: 1200 x 600mm
- Spindle: BT40 / CAT40, 12,000 RPM direct drive, 15 kW (20 HP)