Dimensioni della macchina
MACH 1330-G Trainer
Trainer lathe
oppure chiama +44 (0) 117 965 2706oppure chiama +1 313 489 9667
Descrizione
The MACH L1330G gives toolrooms and educational organisations a compact, reliable, high-performance turning solution, without compromising on quality, productivity or value.
It has an eight-speed gearbox powered by a twin-speed motor, a 2.2kW spindle and a tailstock, and comes with a wide range of technology and accessories as standard.
Punti di forza
- Compact and rigidly built for training workshops
- Eight-speed gearbox with a twin-speed motor
- Consistently high cutting performance
- Wide range of technology and accessories supplied as standard
Specifiche tecniche
- Swing over Bed
- 330mm 13in
- Swing over Cross
- 195mm 7-5/8in
- Centre Height
- 165mm 6-1/2in
- Distance Between
- 750mm 30in
- Width of Bedways
- 206mm 8-1/2in
- Total Length of Bed
- 1430mm 56in
- Width in front of face plate
- 146mm 5-3/4in
- Spindle nose mounting
- D1-4 CAMLOCK
- Spindle bore
- 38mm 1-1/2in
- Taper of spindle bore
- M.T.#5
- Number of spindle speeds
- 16 steps
- Spindle Speed Range
- 45-1800 RPM
- Total travel of cross slide
- 157mm 6-3/16in
- Total travel of top slide
- 95mm 3-3/4in
- Max. size cutting tool
- 16mm 5/8in
- Tailstock total travel of barrel
- 120mm 4-3/4in
- Tailstock taper
- M.T.#3
- Tailstock diameter
- Dia. 45mm 1-3/4in
- Lead screw dia & pitch
- Dia. 22mm Pitch 4mm Dia. 7/8in 8T.P.I.(4T.P.I.)
- Inch threads
- 4-56TPI (28Nos) for metric system; 4-112mm (40Nos) for inch system; 4-72TPI (39Nos) for SL type
- Metric pitches
- 0.5-7.0mm (37Nos) for metric system; 0.45-7.5mm (22Nos) for Inch system; 0.2-7.0mm (34Nos) for SL type
- Feed shaft dia
- Dia. 19mm 3/4in
- Longitudinal feeds
- (42) 0.034-0.41mm/rev. for metric MP(40)0.0012-0.0294 in/rev. for Inch DP(24)0.037-0.5mm/rev. for W/worth SL type
- Cross feeds
- (42) 0.017-0.20mm/rev. for metric MP(40)0.0003-0.0100 in/rev. for Inch DP(24)0.018-0.25mm/rev. for W/worth SL type
- Main spindle motor
- 3HP 2.2KW
- Coolant pump motor
- 1/8HP 0.175KW
- Machine net weight
- 650kgs
- Measurements
- 1700 x 765
Download
Manuale
L1330G and 1440-V Trainer instruction and spare parts manual
Scarica L1330G and 1440-V Trainer instruction and spare parts manual (si apre in una nuova scheda)
Altre macchine di questa gamma
MACH L1330/
1340 Series
- Swing over bed: 342mm Dia (13.46”)
- Distance between centres: L1340 1000mm (40”) / L1330 750mm (30”)
- Spindle bore: 40mm (1.57”)
MACH 1440-UV Trainer
Series
- Swing over bed: 356mm 14in
- Distance between centres: 1000mm 40in
- Spindle bore: 38mm 1-1/2in
MACH L1550 /
L1560-VS Series
- Swing over bed: 387mm Dia
- Distance between centres: 1250mm (50”) / 1520mm (60”) on the 1560-VS
- Spindle bore: 56mm
MACH L1860/
1880 Series
- Swing over bed: 462mm
- Distance between centres: 1000mm / 1500mm / 2000mm
- Spindle bore: 80mm